TECHNICAL 10 water demineralizer
For lab, medical and dental...
Demineralizers of the TECHNICAL series are ideal devices supplied with tap water that can meet the requirements of any modern laboratory in terms of demand for pure water.
Demineralizer TECHNICAL 10. General information
- Supply: tap water
- Capacity:10 - 12 dm3/h,
- Retention rate: 97-99%,
- Mobile water point,
- Power supply: 230V/50Hz
Application: water purified in the device meets the requirements of the standard PN-EN ISO 3696: 1999 for water of the third* degree of purity (water intended for washing glass, feeding dishwashers, autoclaves, batteries, etc.).).
*depends on the quality of tap water
The device is equipped with a supply pressure booster pump along with 24V automation.
Technical parameters
- The device works under the pressure of tap water.
- Water purification stages:
- 5µm sediment prefilter,
- sediment-carbon filtration and softening (integrated module A),
- reverse osmosis,
- System performance: min. 10-12 dm 3 /h,
- The system provided with a pump to raise the supply pressure along with 24V automation,
- The retention rate is 97-99%,
- Operation of the device automatic and unattended,
- Water point provided with demi water spout with min reach. 2 m,
- Movable, adjustable inox arm supporting water points - adjustable up/down, right/left, front/back,
- The possibility of supplying a pressure tank,
- Automatically stop system operation when the tank is full or the filtrate valve is turned off,
- Can be connected to dishwasher, autoclave, washer, etc.,
- Possibility of creating a demi water network with several water points,
- Self-service capability (easy access and replacement of filter cartridges, no need to call for service),
- The system is designed for cold water supply: 5-40ºC,
- The possibility of installing a UV lamp,
- Possibility of self-assembly of the device,
- Power supply: 230V/50Hz,
- System casing made of acid-resistant stainless steel - inox.
Functions that monitor system operation
The device is equipped with 24V automation with a microprocessor-based control and measurement system having:
- color LCD display,
- a conductivity meter that measures the conductivity and temperature of purified water in units of µS/cm or MOhm,
- a clock that displays the date and time,
- preview of service appointments,
- polish language menu on the device display,
- software, on external media, to calibrate the device
- feedwater pressure gauge.
- graphic and audible alarm signaling:
- an alarm indicating the replacement of the mechanical and carbon filters,
- an alarm indicating the replacement of the RO membrane module,
- an alarm indicating the replacement of the UV lamp emitter (optional),
- built-in RS 232 interface for communication with a computer to provide customizable service frequency and alarm levels,
Functions to secure the operation of the system
Interruption of pump operation at:
- low supply water pressure (no supply water) - low pressure sensor,
- full tank - high pressure sensor.
Consumables
Pre-filters:
- 5µm sediment filter,
- a2 module (sediment-carbon softening).
On-site connections:
- cold tap water connection ½" or ¾"
- 230V socket
- drain
The dimensions of the device (width. x deep. x height.): 235x470x570mm
MEDBIT.EN Sp. featuring.o.
We have been in the medical and dental market since 2005. We specialize in providing the highest quality equipment for sterilization and disinfection of medical and dental instruments. We offer only the highest quality products.